When it comes to top of the line pipes, there's the Cobra Speedster, and then there's everyone else. That's because from the port to tip, Cobra stopped at nothing to create the most feature packed quality exhaust system on the market.
From it's PowerPort technology that gives you 2:1 power while maintaining the great 2:2 look, to a replaceable quiet core baffle system for real sound tunability, the Speedster exhaust line redefines standards and sets new ones.
And that's only the beginning. Because beyond all the performance and sound enhancements, you will also find a fit and finish that's unmatched in the industry. Chrome plated and machined billeted tips ensure an ultra clean fit, and then Cobra wraps them in full length custom heat shields with a triple-layer chrome finish that will never blue. When Cobra says they gave this pipe everything they have, they meant it. Literally.
Easy to understand instructions and all required mounting hardware included with each kit
Made in the USA
Product Note:
Specification
Details
Baffles Included
Yes, Removable
Configuration
2-into-2
Country of Origin
USA
Exhaust Diameter
2-1/2 in.
Finish
Chrome
Warranty
Varies (make selection above)
Vehicle Fitment
Fitment is guaranteed or your money back plus free return shipping.
Don’t waste time installing a product that doesn't fit. We worked hard ensuring that this product is an exact fit on the vehicles listed below.
On the Stratiliner how would you address the Xup valve?
By nujent
For the Yamaha Statoliner models, the EXUP valve is removed completely from the exhaust system. The valve and cables are not needed with the new Cobra exhaust system, leave the solenoid box under the seat in place without the cables. This will keep the system in check to not throw a fault code for the actuator. Detailed installation instructions are included with every Cobra exhaust system showing you exactly how to go about this work.
I have a 2014 Stratoliner Deluxe I'm about to put Speedster extra Long's on it do I use the O2 sensor or not
By John
Yes, you will need to re-use the OEM oxygen sensor in order to install this exhaust on your machine. That is, unless of course, your machine is equipped with an oxygen sensor eliminator kit - basically a resister that plugs in place of the O2 sensor's harness. If that's the case, you'd need to add an O2 sensor bung plug so as not to be blasting exhaust gases all over the side of your bike.
Yes, the Speedster Xtra Longs are equipped with a set of full-length heat shields. They're about as blue-proof as they get. Albeit, it's critical that the bike is tuned correctly to run with the pipes, otherwise, a hot engine can lead to bluing of the exhaust, no matter how well they're made. For that reason, we recommend that you adjust fueling accordingly via either, a Cobra Jet Kit or a Cobra Fi2000R fuel tuner. With either one of those kits, engine temps will be kept in check, and of course - it'll run as well as possible, with the new exhaust system.
Will I need a tuner with these pipes. I have the stock air cleaner?
By Brian
While you can probably get away with installing this unit by itself, to get the best possible throttle response and engine performance, it's always best to get some sort of fueling modification device. Basically, any time you change the way air gets into or out of, the motor, you'll want to adjust fueling appropriately to maximize any performance gains available from the new setup.
We recommend the Cobra Fi2000 PowrPro Tuner Fuel Controller in our store to go with any Cobra exhaust. It'll give you the best possible throttle response and engine output without requiring a trip to the dyno.
Verified Purchaser
