Cobra Speedster 909 Exhaust System

Yes, as is noted in the item's description, this exhaust comes with all required installation hardware and instructions. That said, you may have to re-use some of your bike's existing exhaust mounting hardware: bolts, brackets and such. So long as you have the original exhaust on your bike, then you've got everything you need to fit these pipes to your bike.

This system comes with a mount bracket that allows you to still use the passenger peg on that side. The included installation instructions will show exactly how it is to be set up.

Yes, simply choose that 2021 Harley Davidson FXFBS Fat Bob and you will get the correct exhaust to fit it.

Yes, this system does include full coverage heat shields.

Looks like you should have no problem installing that system on your bike with forward controls.

The Cobra exhaust systems do not include header gaskets. Typically, you can reuse the originals if careful with removal of your current system. Otherwise, you can always purchase a new set through our site.

The 909's run too close to the bike in order to provide enough clearance for fitting forward controls. It's been tried more than once ... to no avoil!

Unfortunately, the forward controls interfere with these pipes on 1986-2003 Sportster models. You can have one or the other, but not both in the case of the 909 exhaust system. So be sure to choose carefully!

In the case of the 2018 Fat Boy, yes - you will be able to use the OEM passenger peg with this exhaust.

These exhausts are built with enough clearance so as to allow you to keep the OEM passenger pegs on your. You won't need to relocate or otherwise modify the right side passenger peg in order to fit this to your Sportster.

You most certainly can! The choice is yours as there's no requirement from the manufacturer to run the bike with, or without the baffles fitted.

Yes, there is enough room to clear the right side passenger footpeg when installing this exhaust. You'll have to remove the peg in order to pull the stock exhaust of your bike, but then it goes right back in place without issue and functions as normal.

The bend of this pipe is well clear for both mids or forward controls on the Sportster models listed to fit. The lower two bolts shown in the side view that are bright silver are where the forward controls would bolt on to the frame. They will have sufficient clearance to get them mounted.

Anytime you install a full system it is highly recommended to install a fuel tuner. Especially if you plan on modifying the air intake or cams down the road.

We can only guarantee it fits the stock bike in a two wheel configuration. Provided nothing is in the way of its installation it may not be an issue. Its a very short exhaust system.

Just be sure to select your exact 2013 Harley Davidson XL1200X Sportster Forty-Eight at checkout to receive the correct pipes for your ride.

These Cobra Speedster 909's will fit Sportster models with either mid or forward controls.

Just be certain to select your 2017 Harley Davidson XL1200CX Sportster Roadster from the drop down menu to receive the correct pipes for your ride.

You should have no problem mounting these Cobra Speedster 909's to the 2019 XL1200NS Sportster 1200 Iron. There is sufficient clearance to work with mids or forward controls. The freeway bar should be well clear of the front header.

For machines equipped with oxygen sensors in their stock form, yes, the 909 Speedsters will have a provision for fitting those as well. That is to say, you can certainly re-use the OEM oxygen sensors on these pipes if your bike has them on the stock exhaust system.

Yes, if you were to choose the 2015 Harley Davidson FXDWG Dyna Wide Glide from our fit guide that's immediately to the right of the main image on our website, you'd receive the correct Cobra Speedster 909 Exhaust System for the Harley Dyna Wide Glide!

There are no permanent modifications required in order to install this exhaust on your machine. That said, the only thing you'll want to do is purchase a Cobra Fi2000R Fuel Controller for your FXDB Dyna Street Bob Cobra Speedster 909 exhaust system. In this way, you can be assured of the best throttle response and engine power output.

Yes, all Cobra exhausts come with provisions for fitting the OEM oxygen sensor on any machine you select from our fit guide. For the 2016 Harley Sportster XL883N Iron, you'll be able to plug the stock O2 sensors straight into the exhaust without the need to make any permanent modifications to your bike. Just remove the stock sensors from the stock exhaust and plug 'em into the Cobra 909 - it's as simple as that!

All of the pipes Cobra builds are designed around original factory controls. It's difficult to say with certainty that it will fit with your aftermarket floorboards and controls. Though, as a rule of thumb, provided your controls use the standard mid-mount point in conjunction with the forward control point, it's likely it will work with this exhaust. Still, if clearance is tight with your current exhaust, then it's likely to become an issue here.

Cobra's Speedster 909 Exhaust System is specifically engineered to work with the OEM foot controls - and any Cobra floorboard kit we sell, on any machine you select from out fit guide. In the event that your bike has aftermarket foot controls and/or floorboards that are not from Cobra, send us a note before ordering so we can be sure there won't be any issues with your particular setup!