Free Shipping.

Expert Service.

Call 888-575-6570

Vance & Hines Twin Slash Round Slip-On Exhaust

(20 reviews)

Item: 325533

$499.99

Add to Cart to See Buyers' Club Price

Join the Frequent Buyers' Club program for exclusive rewards and perks. For a limited time only get your lifetime membership for a one-time fee of just $0.01. No gimmicks, just rewards.

Select Your Vehicle - Fitment Guaranteed

Vance & Hines Twin Slash Round Slip-On Exhaust


The best price, best looking, best performing dual slip-on exhaust, Vance & Hines Twin Slash Round Slip-ons offer a large 4" diameter muffler body with a baffle delivering strong performance with a throaty rumble and the distinctive Vance & Hines twin slash end treatment.

Specification Details
Baffles Included Yes, Removable
CARB Approved Yes
Configuration Dual Muffler
Country of Origin USA
Exhaust Diameter 4 in.
Finish Varies (make selection above)
Warranty 1 Year Manufacturer Warranty

Vehicle Fitment


Fitment is guaranteed or your money back plus free return shipping.
Don’t waste time installing a product that doesn't fit. We worked hard ensuring that this product is an exact fit on the vehicles listed below.

Harley Davidson
  • FLHR Road King 1995-2022
  • FLHRC Road King Classic 2007-2013
  • FLHRCI Road King Classic 1998-2006
  • FLHRI Road King 1996-2006
  • FLHRS Road King Custom 2004-2007
  • FLHRSI Road King Custom 2004-2006
  • FLHRXS Road King Special 2017-2023
  • FLHT Electra Glide Standard 1995-2009
  • FLHTC Electra Glide Classic 1995-2005, 2007-2013
  • FLHTCI Electra Glide Classic 1996-2006
  • FLHTCU Electra Glide Ultra Classic 2017-2019
  • FLHTCU TC Ultra Classic Electra Glide Twin-Cooled 2015-2016
  • FLHTCU Ultra Classic Electra Glide 1995-2016
  • FLHTCUI Ultra Classic Electra Glide 1995-2006
  • FLHTCUL Electra Glide Ultra Classic Low 2015-2017
  • FLHTCUL TC Electra Glide Ultra Classic Low Twin-Cooled 2015-2016
  • FLHTCUTG Tri Glide Ultra Classic 2009-2023
  • FLHTI Electra Glide Standard 2003-2006
  • FLHTK Electra Glide Ultra Limited 2010-2023
  • FLHTKL Electra Glide Ultra Limited Low 2015-2019
  • FLHX Street Glide 2006-2023
  • FLHXI Street Glide 2006
  • FLHXS Street Glide Special 2014-2023
  • FLHXXX Street Glide Trike 2010-2011
  • FLTCU Ultra Classic Tour Glide 1995
  • FLTCUI Ultra Classic Tour Glide 1996
  • FLTR Road Glide 1998-2004, 2007-2009
  • FLTRI Road Glide 1998-2006
  • FLTRK Road Glide Limited 2020-2023
  • FLTRU Road Glide Ultra 2011-2013, 2016-2019
  • FLTRX Road Glide 2015-2023
  • FLTRX Road Glide Custom 2010-2013
  • FLTRXS Road Glide Special 2015-2023

Customer Reviews

Write Review

Vance & Hines Twin Slash

By   on  Verified Purchaser

Just what I was looking for.


Awesome

By   on  Verified Purchaser

Awesome product. It's what I expect from Vance and Hines.


Deeper sound

By   on  Verified Purchaser

Gave my stock streetglide a better deeper sound, easy install and very fast shipping!


Thumbs up

By   on  Verified Purchaser

Cant go wrong with Vance and Hines, these slip ons offer quality chrome, and a nice throaty bark when you hop on it, and they don't drone on the highway so you can hear yourself think (or listen to music).


Thank you

By   on  Verified Purchaser

Great product, thank you very much


Great fit and finish

By   on  Verified Purchaser

These met my expectations - but then that is why I stayed with Vance and Hines. They have been delivering high quality Harley Davidson products for years now. This is not the first time I've purchased V&H exhaust products, nor will it be my last. Great fit and finish.


Vance & Hines Twin Slash

By   on  Verified Purchaser

Sounds great on my Electra glide ultra.


Awesome pipes!

By   on  Verified Purchaser

I have a 2010 ultra classic that was completely stock. I had been doing a lot of reading on different aftermarket pipes. I had come down to buying the V&H. 1st reason was the cost, 2nd for the great reviews of others. 3rd was the looks. I am supper happy that I went this direction! It took less than a half hour to take my stock pipes off and install the V&H. They sound and look great! I can’t wait for the weather to warm up and get out!


Price & Sound. Good Deal

By   on  Verified Purchaser

This is my 2nd time using these V&H slip on mufflers. Loud when on the throttle yet reasonable when cruising. I already had V&H headers on my 2009 Street-Glide. Love them.


Great Sounding Exhaust!

By   on  Verified Purchaser

Great sounding exhaust for all year Vaquero/Voyagers. Install on a 2020 was a breeze and well worth it.


Vance & Hines Twin Slash Round Slip-On Exhaust

By   on  Verified Purchaser

Very good.


Slip on Exhaust

By   on  Verified Purchaser

Great deal for the money.


Vance and Hines Slip On

By   on  Verified Purchaser

Great quality, fit, and sound.


Love it!

By   on  Verified Purchaser

Awesome product! Love it! My Yamaha Vstar 950 its a monster now!


Happy rider, smooth sound

By   on  Verified Purchaser

Its a nice slip on, good sound and good pressure from back in number 1.


Great price, fast shipping

By   on  Verified Purchaser

OMG...great price and great product! Husband approved!


2015 V-Star 950

By   on  Verified Purchaser

Exhaust looks great. Sound was a little louder than I expected. Very satisfied over all.


Vance & Hines Twin Slash

By   on  Verified Purchaser

Love the look and sounds great,the fitting was not too bad,I have a 2013 v star 950 and the only difficulty I encounter was the heat shields on the bike had to be re-positioned, I had to move them all forward to allow the slip on muffler to line up with the bolts on the bottom bracket on the bike,but other than that was not so bad to install,looking to get a fuel pack now to eliminate the pop now,overall very happy with the purchase.


Vance and Hines Slash Mufflers

By   on 

It's a good slip-on for the money. Generally speaking, the installation for simple and they look good. They are flow through however, yet maintain a relatively quiet sound. They at least sound like a Harley. I was hoping that they would have a louder sound. They did give the bike a little performance increase and with an air cleaner intake, it should improve further.


Fast shipping, great sound.

By   on  Verified Purchaser

Bought Sunday, arrived Tuesday. Had em on in 20 minutes. Make sure you polish them to get all the oil from your skin off before you start bike. The clamps from V&H have oil on them to prevent corrosion during storage. This will burn off and smell for a while. Don't freak out. They are deep and throaty when you want, quiet down around 2000 rpm.. Which I like.


How many stars would you give this product? Write a review.

Write Review

Questions & Answers

Ask Question

Is it difficult to remove both baffles?

The baffles are not difficult to remove, at least, not when the exhaust is brand new! Though, after a few years of riding, the constant heating and cooling of the pipes and dissimilar metals used for the bolts, baffles and muffler sleeves, it can be difficult to do so later on. To ameliorate this problem we recommend that you apply high-temperature anti-seize to the bolts that secure the baffles in place before you install the mufflers on your machine. In doing so, you'll save yourself a lot of grief in the future should you decide that you want to pull that baffles.

By Staff
Answer Question

Will this fot or do they make one that will fit a V Star 1300

Vance and Hines only offers a 2:1 Pro Pipe for the Yamaha XVS1300A V-Star 1300 at this time due to the factory 2:1 design from Yamaha.

By Staff
Answer Question

I have a 2016 ulatra limited (Flthtk) do i need to put a fuel pak on with this type of exhaust? An if i take the baffles out do i need to put a fuel pak on?

Slip-on mufflers do not require the installation of a Fuel Pak unless they are also paired with aftermarket headers and an intake. If the rest of the bike is stock it would not be required.

By Staff
Answer Question

What type of baffles comes with the V & H twin slash Slip-ons IRT FP3 mapping? FP3 shows a standard, Quite, or the Q.

These mufflers, along with all other Vance & Hines exhausts, ship from the factory with a set of standard baffles installed. You'll want to choose the standard baffle selection on your FP3 when fitting these mufflers.

By Staff
Answer Question

How do you take the baffles out

It's pretty simple, actually. Each baffle is secured with a single bolt. Just unscrew the bolt and slide the baffle straight out the back of the pipe. Just be sure to apply a little anti-seize each bolt before you install the mufflers so as to prevent them from seizing up. Otherwise, over time, the heat and contact between dissimilar metals tends to weld the bolt to the baffle, which makes removing those bolts a real pain! With anti-seize, you won't have to worry about that at all!

By Staff
Answer Question

Will these mufflers fit a 2018 Harley Ultra Limited FLHTK ?

Yes, if you were to choose the V&H Twin Slash Round slip-on mufflers for the 2018 Harley FLHTK Electra Glide Ultra Limited, you'd get the proper exhaust to fit your machine!

By Staff
Answer Question

Can I simply install them, and ride? or do I need to duo something else?

In most cases, on fuel-injected bikes at least - you can bolt these mufflers on and hit the road. The OEM ECU maps will probably be able to compensate for the change without issue. If the bike appears to be running well, then you've got nothing to worry about. Still, if you want to get the best possible throttle response and engine performance out of the machine, we highly recommend a Vance & Hines Fuelpak FP3 to along with it. The tuner is easy to install and configure with the use of an iOS or Android smartphone.

By Staff
Answer Question

Do these fit a 1700 vaquero 2011 model

Yes, just choose the 2011 Kawasaki VN1700J Vulcan 1700 Vaquero from our fit guide. You'll get the correct Vaquero aftermarket exhaust to fit your bike.

By Staff
Answer Question

Header Pipes

Do i.need to replace the header pipes also.

No, the V&H Twin Slash Round Slip-On mufflers will bolt straight onto the OEM headers. There's no need to purchase any aftermarket header pipes to fit these mufflers to any of the bikes listed in our fit guide!

By Staff
Answer Question

Do just need to do anything else after installing pipes? It's a 2016 Road Glide with a Fuelpak FP3 and Screaming Eagle headers.

If your bike already has a FLTRX Fuelpak on it, you'll want to re-configure it to work with this exhaust. In doing so, you'll get the biggest power benefits possible out of the new mufflers. If the Fuelpak you have is an Road Glide FP3 from Vance & Hines, just use the free Vance & Hines Fuelpak app to make the requisite changes.

By Staff
Answer Question

Will these still fit if the down tubes are changed at a later date?

If, by down tubes you mean headers- so long as the headers you're using are designed to work with the OEM mufflers, then you should have no problem fitting these mufflers to those headers. Generally speaking, unless otherwise noted - all Vance & Hines slip-on mufflers are designed to work with the stock headers, or headers that work with stock mufflers.

By Staff
Answer Question

It shows your price - is this for one muffler or for both needed?

The price is indeed for a pair of mufflers. You only need to order a quantity of one to replace both of the stock mufflers on your machine.

By Staff
Answer Question

Are the slip on pipe wraped over baffles or they the galvanized only thanks.

The Vance & Hines baffles that come with the Twin Slash round slip-on mufflers do not include any wrapping. For that reason, Vance & Hines refers these baffles as of a maintenance-free design.

By Staff
Answer Question

Do you recommend torque cones

Torque cones were generally required on older, less-than-well-designed exhausts to solve off-throttle engine response. In the case of these slip-on mufflers, you won't see any benefit with torque cones. If you wanted to get the most out of these mufflers, however, we highly recommend the installation of some sort of fuel tuning device, specifically, a Vance & Hines Fuelpak FP3. With that unit, you'll be assured the best possible throttle response and the most engine power possible, all with a simple-to-install device that's also very easy to adjust.

By Staff
Answer Question

Do you send exhaust gaskets with this product, or do I need to order separately? And if so, how and where do I order these gaskets?

If the original gaskets are in good condition, there's no need to replace them. However, if you're concerned with their condition or just want to put new ones in, we do have Cometic exhaust gaskets available in packs of ten.

By Staff
Answer Question

Can the baffle, or part of the baffle be removed in order to possibly make the motorcycle louder?

Yes, the baffles can indeed be removed to make the exhaust louder.

By Staff
Answer Question

Do this item have a hole for the sensor?

Yes. Vance & Hines exhausts have a provision for installing the oxygen sensor on machines that have on fitted to the stock exhaust system.

By Staff

Yes

By Anon.
Answer Question

Have a question? Please ask our experts and customers who own this product.

Ask Question