Free Shipping.

Expert Service.

Call 888-575-6570

Dynojet Power Commander V

(4 reviews)

Item: 325697

$398.99 – $451.99

Select Your Vehicle - Fitment Guaranteed

Dynojet Power Commander V


Dynojet PC-V is built for those looking to get the most out of their engines. This sleek module seamlessly optimizes your air/fuel ratio without directly changing the ECU, making it effortless to push it to the max. Easily uninstall to revert back to factory default settings when you feel like giving everyone else a chance. Power Commander V takes the guesswork out of pairing efficiency with performance, keeping your focus where it belongs - on the journey ahead.

Power Commander V has a fuel change range of -100/+250%, automatically giving you the best mix of performance and fuel efficiency at all times. This fuel tuner holds two maps at a time for multiple drive options (via the Power Commander V map switch accessory), as well as 10 throttle position columns, so you won't sacrifice comfort for performance. Featuring a plug-and-play kit, Power Commander V can be installed discreetly underneath your seat, ensuring your ride looks as good as it runs.

  • Compact design for discrete placement and easy uninstallation to revert to stock settings
  • Vast library of tunes for any combination of aftermarket parts
  • Easily change and upgrade tunes as you upgrade parts
  • Comes with Power Core software that connects dyno runs with fuel tuners to unlock your machine's potential
  • Compatible with Dynojet AutoTune system (sold separately) for the ultimate in precision fuel delivery and engine power
  • Analog input which allows you to install any 0-5 volt sensor and build an adjustment table based on its input such as boost or temperature
  • Easily connects to your computer via USB
  • Each cylinder can be mapped individually and for each gear, giving riders more granular control
  • One year manufacturer warranty
  • Comes with all required installation hardware and instructions
  • Made in the USA
Specification Details
CARB Approved No
Country of Origin USA
Ignition Control Varies (make selection above)
Warranty 1 Year Manufacturer Warranty

Vehicle Fitment


Fitment is guaranteed or your money back plus free return shipping.
Don’t waste time installing a product that doesn't fit. We worked hard ensuring that this product is an exact fit on the vehicles listed below.

Can-Am
  • Spyder F3 SE5 2016
  • Spyder F3 SE6 2015-2019
  • Spyder F3 SM6 2015-2016
  • Spyder F3-S SE6 2015-2019
  • Spyder F3-S SM6 2015-2016
  • Spyder F3-T SE6 2015-2019
  • Spyder RT SE6 2014-2017
  • Spyder RT SM6 2014-2016
Ducati
  • Diavel 2011-2013
  • Diavel AMG 2011-2012
  • Diavel Carbon 2011-2012
  • Diavel Chromo 2012
  • Diavel Dark 2013
  • Diavel Strada 2013
Yamaha
  • Bolt 2014-2017
  • Bolt C-Spec 2015-2016
  • Bolt R-Spec 2014-2017
  • V-Star 950 2009-2015
  • V-Star 950 Tourer 2009-2017
  • YZ250FX 4-Stroke 2020-2021

Customer Reviews

Write Review

Fits

By   on  Verified Purchaser

Works perfectly. Maps and software are free, just make sure you have a system running windows 10 and core i3 at minimum. The program likes to eat RAM so the more processing the better it will run.


Any Aftermarket Upgrade. A Must

By   on 

I have it four stars because I haven't gotten to the programming part of it, just what my dealer did on the dyno, which was a 5hp gain with Vance and Hines added. Don't get me wrong 5hp is definitely noticeable, but I feel there's more she can put out.


Dynojet PCV

By   on  Verified Purchaser

Easy Install


Holy moses

By   on 

Slapped it on, wired it up to my laptop and downloaded the right maps etc. Easy as pie. Started my bike and holy moses, this thing cooks!


How many stars would you give this product? Write a review.

Write Review

Questions & Answers

Ask Question

does this come with complet installation instructions?

Yes, there is installation instructions included with the Power Commander V.

By Andy
Answer Question

can this handle camshaft upgrades

2021streetglide special

Yes, you can change the tune as you change out different performance related parts with this fuel controller.

By Andy
Answer Question

Does this connect to ecm or does it fit on the feul injector

This unit would piggy back the harness going to the injectors, not connect directly to the ECM.

By Andy
Answer Question

Is there a specific model of the pcv for a 2007 victory hammer or are they all generic

If you're referring to the wire harness, no, these are not generic. They come with automotive-quality connectors that plug straight into the OEM wire harness. Each unit comes pre-programmed with a stock map (no modification) and a map for slip-on applications. While the latter is suitable for most slip-on mufflers made for the Hammer, it never hurts to take your bike to a competent tuner in order to get the best possible engine performance and throttle response.

By Staff
Answer Question

Will this fit a 2006 victory kingpin 6 speed.

I've purchased a used 2006 victory kinpin 5 speed it has aftermarket exhaust an is running rich even after all air leaks are repaired. Leads me to believe I need remapping.

Yes, if you were to select the 2006 Victory Kingpin Power Commander V from our fit guide, you'd receive the correct parts to fit your machine. In your particular situation, this unit - when properly programmed, would certainly help get your bike running correctly!

By Staff
Answer Question

DO YOU CARRY THE COMMANDER V 25-012M FOR A CAN AM 500 OUTLANDER

ALSO COULD USE THE AT-300 AUTO TUNER

We do have that unit listed in our store, simply select your model year from the drop down and we can get it on its way to you. That part number will fit 2009-2012 Can-Am Outlander 500 models. You can find the corresponding AT-300 Autotune kit by searching "Dynojet Power Commander V Autotune Kit with Dual O2 Sensors" in our store search bar.

By Staff
Answer Question

Will this particular commander v fit 07 gsxr 750

We no longer have a Power Commander V to fit the 2007 Suzuki GSX-R750. It uses it own SKU for the 750 models from 2006-2010 Power Commander number 20-006. I would suggest checking with Dynojet directly as our suppliers no longer carry this part number.

By Staff
Answer Question

do you need to modify anything for a 15 honda stateline when changing exhaust and adding this power commander?

As far as hardware is concerned, there are no other parts required to install a good exhaust and the Power Commander on your machine. Though, you will want to take your bike to a good dyno tuner in order to have the Power Commander properly mapped for your bike's exact fuel delivery requirements. Other than that, with the exhaust and the PC-V, you've got everything you need.

By Staff
Answer Question

is necessary to replace the exhaust?

to install the new power commander V do I need to purchase after market exhaust for the 2013 yamaha raider dcl?

There's no need to change the Yamaha Raider exhaust system when installing a PC-V. The big thing is to be sure you have a competent dyno operator build a map for your machine so as to get the biggest possible power advantage. In the future, should you decide to add an exhaust to go with the PC-V for the Yamaha Raider, the Power Commander is more than ready for the task.

By Staff
Answer Question

Is this product just plug & play or does it REQUIRE programming?

The PC-V ships with two maps: one is completely stock (no fuel modifications) and one is programmed for a slip-on exhaust. Depending on your machine, that may be enough for your needs. However, if you want to get the biggest possible power gains and the best throttle response, we highly recommend that you visit a competent dyno tuner in your area to have a custom map built for your machine's specific needs. The only way to get the most out of this unit is via a good dyno tune.

By Staff
Answer Question

will this tuner marry to a bike or can you tune more than one bike

All Power Commander products, including the PC-V, are not married to the ECU. They work by modifying the fuel signal in real time as you ride the bike. They don't alter the ECU's memory at all, but rather, manipulate its output based upon the maps programmed into the PC-V. If you were to remove it from your machine, it goes back to the stock signal since it's no longer able to act as a middleman in modifying fuel delivery. So, while you can use it on multiple bikes (so long as they're the same make, model and year), it won't adjust fuel input unless it's physically installed on that one machine.

By Staff
Answer Question

Will this run my bike without. the 02 sensor on my 2016 kwasaki voyager 1700 abs with aftermarket vance and hines pipes?

Since the Power Commander V basically ignores the incoming signals from the oxygen sensor, you won't have any problem using it on your machine with, or without the oxygen sensor installed. There's no need to purchase additional parts in order to have it fit your machine's current configuration.

By Staff
Answer Question

Have a question? Please ask our experts and customers who own this product.

Ask Question