Dynojet Power Commander V Autotune Kit with Dual O2 Sensors

Item Number: 343557

Universal Fit – Review specifications carefully.

In Stock

Product Description


Dynojet Power Commander V Autotune Kit with Dual O2 Sensors

Uses virtually the same technology found in Dynojet's patented Tuning Link dynamometer tuning software (for automated fuel mapping), along with a pair of Bosch Wide Band O2 sensors.

Once connected to your machine's Power Commander V, the Auto Tune kit monitors the fuel mixture via the included Wide Band O2 sensor in the exhaust. It then sends this information to the Power Commander V and automatically corrects fueling while you ride. Each map has preset air/fuel ratio values included - simply plug in the unit and let it do the work.

Connects to your PC-V-equipped machine via a single cable and requires only a ground and 12V connection to be made to install. After that, plug the oxygen sensors into the exhaust and, if your exhaust doesn't have those, a pair of steel weld-in 18mm O2 sensor bungs are included.

Fully adjustable for advanced users that would like to change the air/fuel ratios from the baseline. Each throttle opening/RPM combination is individually adjustable, so that you can have both fuel economy, during cruise, while maintaining peak output at larger throttle openings. For most models of bikes it's also possible to adjust the air/fuel ratios in each gear. This gives you total control of the fueling in every gear and throttle/RPM area for absolute maximum performance.

The Auto Tune kit can be configured to run and correct at all times or by using the map switch port on the PCV. You can set it up so that you can switch back and forth between the tuning modes and the base map settings. You can also configure the Auto Tune kit to wait until the bike is at a certain operating temperature before beginning to make adjustments.

Universal Auto-tune kit is designed for twin cylinder motorcycles and ATVs equipped with a Power Commander V allowing control of two cylinders separately and simultaneously. Each kit includes two O2 sensors, control module with 2 sensor inputs, CAN connection cable, CAN termination plug, two custom length exhaust sensor cables, and two weld boss kits.

Product Note: Only fits machines equipped with Dynojet Power Commander V (sold separately).

Spec Details
CARB Approved No
Connection Type Splice-In
Country of Origin USA
Thread 18 mm x 1.5

Customer Reviews

Questions & Answers