Free Shipping.

Expert Service.

Call 888-575-6570

Freedom Performance Liberty Slip-On Exhaust

(1 review)

Item: 344075

$520.59 – $559.71

Select Your Vehicle - Fitment Guaranteed

Freedom Performance Liberty Slip-On Exhaust


  • 4" mufflers that fit stock headers
  • Distinctively styled billet end tips
  • Removable baffles
  • Complete with mounting hardware and heat shields
  • Easy installation using stock mounting brackets
  • Acoustic packing for deep rich tone
  • Made in USA
Specification Details
Baffles Included Varies (make selection above)
CARB Approved Varies (make selection above)
Configuration Dual Muffler
Country of Origin USA
Exhaust Diameter 4 in.
Heat Shield Included Yes
Material Varies (make selection above)
Muffler End Cap Varies (make selection above)
Muffler Sleeve Varies (make selection above)

Vehicle Fitment


Fitment is guaranteed or your money back plus free return shipping.
Don’t waste time installing a product that doesn't fit. We worked hard ensuring that this product is an exact fit on the vehicles listed below.

Harley Davidson
  • FLHR Road King 2017-2022
  • FLHRXS Road King Special 2017-2023
  • FLHT Electra Glide Standard 2019-2022
  • FLHTCU Electra Glide Ultra Classic 2017-2019
  • FLHTCUL Electra Glide Ultra Classic Low 2017
  • FLHTK Electra Glide Ultra Limited 2017-2023
  • FLHTKL Electra Glide Ultra Limited Low 2017-2019
  • FLHX Street Glide 2017-2023
  • FLHXS Street Glide Special 2017-2023
  • FLHXST Street Glide ST 2022-2023
  • FLTRK Road Glide Limited 2020-2023
  • FLTRU Road Glide Ultra 2017-2019
  • FLTRX Road Glide 2017-2023
  • FLTRXS Road Glide Special 2017-2023
  • FLTRXST Road Glide ST 2022-2023
Indian
  • Chief Classic 2014-2018
  • Chief Dark Horse 2015-2018
  • Chief Vintage 2014-2018
  • Chieftain 2014-2018
  • Roadmaster 2015-2018
  • Springfield 2016-2017

Customer Reviews

Write Review

Great slip-ons but...

By   on 

I am extremely happy with them and they were worth every penny. With that said please excuse this long-winded review. Also keep in mind as you read this I am mechanically challenged so some of the issues I had may you may not. They were installed on my 2013 Voyager which is Ivanized and only has a K&N filter but no modified intake. First, they are packaged well but quality control is lacking from the factory. One of my mufflers had a small dent but since it’s under the saddle bag and in toward the belt no one will ever see it so I didn’t get to upset over it. The center pipe was all scratched up and still had the machine marks but again it’s never going to be seen. There are no instructions with the mufflers leaving you to figure out the correct order to put the shields and clamps on and there is an order. This is where someone with a mechanical background would shine. Pics would have helped or simple instructions telling you to mount the supplied heat shields before you put the clamps on. The pipes I ordered are multi fit and are for the 2009-2018 voyager. One pipe comes with the threaded hole for the O2 sensor. The problem is my 2013 Voyager doesn’t have one and there was no plug supplied to fill in the hole. I discovered they are M12 x 1.25. It’s the same size as many universal oil drainplugs so I bought a drainplug for $4 and it fit fine. After they were installed I started up the bike and it growled at me. For the first few minutes while the idle is up they are a little loud. Once it heated up they quieted down and were not much louder than my stock (drilled) pipes. When you hit the throttle, they bark and have a loud deep low throaty sound. When you get in to the throttle they come to life but at cruising speed their just deep and throaty. I could listen to my radio at about the same volume as before. To conclude I will just say, I was disappointed when I opened the box but nothing that caught my attention will ever catch anyone elses. After I figured out the order to put on the parts it went together easy. The bike now sounds like it demands respect when you wake her up but when cruising my ears aren’t ringing.


How many stars would you give this product? Write a review.

Write Review

Questions & Answers

Ask Question

Do they come with heat shields?

Yes, as is noted in the description, these mufflers do come with a set of heat shields.

By Staff
Answer Question

Are these quite simple to put on? I'm not mechanically saavy to say the least, but want something with a little rumble that wouldn't be too difficult for me.

As far as exhaust modifications go, a slip-on is the easiest to install as it doesn't really involve a lot of work. If you can get the stock mufflers off with the tools you have, you won't have a problem fitting these, or any other slip-on exhaust available for your machine. Just be sure to take your time and follow the included instructions during the installation. And of course, if you run into any trouble at all, give us a ring and we'll be happy to help you through any roadblocks!

By Staff
Answer Question

I have Kawasaki vaquero 2017 with a O2 sensor also.Will those fit my fit too.

Yes, that's correct. This exhaust will indeed fit the 2017 Kawasaki Vaquero. And, it does include a provision for fixing the OEM oxygen sensor to the right-side muffler. Everything you need to put it on your bike is in the box. Just be sure to choose your exact model from our fit guide and you'll be all set!

By Staff
Answer Question

My ride, 2017 Kawasaki Voyager 1700, stock exhaust has O2 sensor, do these slip ons have an O2 port?

Yes, that's correct. The right-side muffler has a provision for fitting the OEM oxygen sensor from your bike in the same fashion as the original muffler. In this way, there's no need to purchase any additional hardware to complete the installation of the muffler. Just unbolt the old mufflers along with said O2 sensor, put these on and you're ready to ride!

By Staff
Answer Question

Have a question? Please ask our experts and customers who own this product.

Ask Question