Fits:
$471.42 – $714.95
Add to Cart to See Buyers' Club Price
Join the Frequent Buyers' Club program for exclusive rewards and perks. For a limited time only get your lifetime membership for a one-time fee of just $0.01. No gimmicks, just rewards.
Vance & Hines Eliminator 400 slip-ons feature large 4-inch mufflers finished with race-inspired CNC machined billet end caps. Eliminator 400s are tuned to give your bike a deep and aggressive roar.
Product Note:
| Specification | Details |
|---|---|
| Baffles Included | Yes, Removable |
| CARB Approved | Yes |
| Configuration | Dual Muffler |
| Country of Origin | USA |
| Engine Type | Varies (make selection above) |
| Exhaust Diameter | 4 in. |
| Muffler End Cap | Varies (make selection above) |
| Muffler Sleeve | Varies (make selection above) |
| Warranty | 1 Year Manufacturer Warranty |
Fitment is guaranteed or your money back plus free return shipping.
Don’t waste time installing a product that doesn't fit. We worked hard ensuring that this product is an exact fit on the vehicles listed below.
By
Danny H.
on
Verified Purchaser
Easy to install, looks great and has an excellent sound. Not too loud and not too quiet. I had to use one of the old clamps because one of the clamps that came with the mufflers wouldn't tighten enough to keep the muffler from sliding back.
By
Kevin T.
on
Verified Purchaser
Great pipes! Look good, sound good and went on easy peazy!
By
Norman C.
on
Verified Purchaser
Very please with these slip on mufflers look fantastic and sound awesome very easy installation, woke my tri glide right up the mufflers are mild sounding as your cruising and when you get on the throttle they definitely bark now my tri glide definitely sounds like a Harley should. Can still even hear the radio at speeds of 80 to 90 mph, these mufflers are a must have if they will fit your ride. No complaints at all 100% satisfaction
By
Mark B.
on
Verified Purchaser
Very nice pipes really sound great.
By
James P.
on
Verified Purchaser
These were exactly what I was looking for in a slip on. Just a nice sound, that's not to loud.
By
Rodney R.
on
Verified Purchaser
The exhaust pipes were very well packed. Parts and instructions were all there.
By
Brian
on
Verified Purchaser
Sounds great, reasonable price. Definitely recommend.
By
Gordy
on
Verified Purchaser
I always buy vance & hines eliminator 400, they look the best on harley davidsons, they're just the right amount of rumble & I can still here the radio.
By
Robert D.
on
Verified Purchaser
Great product. Easy install.
By
Ron B.
on
Verified Purchaser
Fit perfectly, sounds great. (2024 road glide)
By
Donnie P
on
Verified Purchaser
Ordered the v&h eliminator 400 slip on exhaust for my 23 street glide, easy to put on and they sound fantastic.
By
Chris B.
on
Verified Purchaser
Very easy to install, sounds great also.
By
Jeremy S.
on
Verified Purchaser
The Eliminator 400 slip ons sound amazing. Aggressive when I get on the throttle and mellow at highway speeds.
By
Robert W.
on
Verified Purchaser
Sounded much better than I expected. Sounds almost like long shot pipes and I love it.
By
Daniel J.
on
Verified Purchaser
Exactly what I wanted and expected from V&H. Well definitely use again.
By
James H.
on
Verified Purchaser
Great quality pipes that you can always count on with Vance & Hines.
By
Al M.
on
Verified Purchaser
Has a nice Rumble not the loudest but sound awesome way better than stock pipes.
By
Dillard C.
on
Verified Purchaser
The pipes look and sound great. Highly recommend.
By
Solo
on
Verified Purchaser
Very nice but, subtle sounding exhaust. A very good finish that looks great on my Road Glide. Easy install.
By
Francois L.
on
Verified Purchaser
Very satisfied with the slip ons. Did perfectly. The only negative point to say one of the collars is too big. I had to take the collar and tighten as much as I could and then install it and it was leaking a little bit. I rode and the pipe was hot, I tightened it. It's better. I recommend this store as well as the slip on Vance & Hines.
By
None
on
Verified Purchaser
We love them! Sound awesome!
By
Harley G.
on
Verified Purchaser
Wish I bought them sooner. Sound good and look awesome.
By
Les H.
on
Verified Purchaser
Can't imagine riding all day listening to these. How do you know without installing them. Can't return! Waste of money!
By
Frank F.
on
Verified Purchaser
Easy to shop, all the information needed to understand the product, and easy to pay. Mufflers arrived in a few days, in excellent condition. Easy to install with instructions. Sound great, throaty, and not too loud, like the mufflers I took off the previous owner had gutted. They had that obnoxious loud blew sound that a stock motor makes, with no back pressure. I'm so happy with my 400s, and they look great!
By
Steve V.
on
Verified Purchaser
Great slip on. Only problem right side had burr inside would not fit - had to grind inside muffler end. Sounds great.
By
Rolando M.
on
Verified Purchaser
Extremely Happy with my slip-on.
By
Robert T.
on
Verified Purchaser
Perfect fit.
By
Dale A.
on
Verified Purchaser
Beautiful chrome exhaust with a deep, low rumble that sounds great!
By
Alan R.
on
Verified Purchaser
Easy to install. Needed to buy a 15mm deep well socket but other than that, install went as planned. The sound is amazing. Loud enough to know it's a Harley but does not drowned out the music. Perfect for me!
By
Jack S.
on
Verified Purchaser
Mufflers speak for themselves. Five stars plus!
By
Darren
on
Verified Purchaser
Easy to install, great look. Sound is great with nice deep sound with the baffles in. Installed on a 2010 Road King classic.
How many stars would you give this product? Write a review.
By Tony
I'm in the middle of building a 117 v twin. Also blacking the bike out so I'm looking black slip on's that will work with the engine build as far as performance. I also don't want a loud exhaust. Rather have that quite deep rumble until you twist the throttle and turn it loose. I'm expecting around 140-150 hp to the wheel so just looking an inexpensive exhaust that will work!🤷♂️
Most of the sound damping on newer bikes, eg. those with Milwaukee 8 engines, comes from the catalytic convertor that's in the headers. Consequently, most aftermarket slip-ons don't bump sound output too much. They certainly do flow a little better than stock, so they're an improvement over the original mufflers. Whether or not that's enough to get you to your power target is difficult to say since V&H doesn't publish dyno graphs (and I don't know exactly what you're riding). Still, most power gains are made from bumping compression, cams and bigger pistons/strokes. So, you're certainly on the right track. From a sound perspective, also, these aren't going to be too loud since they're still approved for road use in California, which mandates a sound output limit anyway. Whether or not they'll be loud enough or too loud, again, it's impossible to say since that's a rather subjective matter. They will certainly look nice, that's about the only sure thing!
By Anon.
Yes, absolutely! Just choose the 2024 Harley Davidson FLHTCUTG Tri Glide Ultra Classic slip-ons from our fit guide and you'll receive the correct mufflers to fit your trike.
By Anon.
Absolutely! Just choose the 2023 Harley-Davidson FLHX Street Glide slip-on exhaust from our fit guide and you'll get everything you need to fit your bike. The mufflers bolt straight onto the original Harley header pipes and really, MIGHT take you ten minutes to put on. Installation is really quick and simple.
By Harry
If you are only installing slip-ons, you should not need to do anything after installation.
By Chuck
Yes, the baffles included with these mufflers are indeed removable!
By Dave
Generally speaking, the OEM ECU on most bikes can handle the change from stock mufflers to aftermarket slip-ons, including the Eliminator 400s. The only caveat to that is if you're in an area with particularly poor fuel or, ride mostly at higher altitudes (5,000 ft. + above sea level). If that does not describe your situation, then it's unlikely you'll need to adjust fuel delivery upon the installation of these slip-ons.
By Wayne
Eagle slip-on mufflers, high Flo air filter and remapped the computer. After I install the Eliminator 400s do I need to have the computer remapped again? Just worried about burning valves,. Thanks Wayne
In the event your bike's ECU has already been re-mapped to for use with a set of Screamin' Eagle slip-ons, then you're already well within the ballpark in terms of fuel delivery. While there's going to be some difference in fueling requirements, it won't be significant enough to cause internal engine problems. That said, if you want to get the most out of your new setup, you'll certainly want to have the bike re-mapped to work with the new exhaust. In this way, you'll get the best possible throttle response and engine power out of the bike.
By Wayne
If you were to select the 2005 Harley Davidson FLHRI Road King slip-on mufflers from our fit guide, you'd receive the correct Vance & Hines Eliminator 400s to fit your machine.
By Anon.
Yes, we do have Vance & Hines 400 dual slip-on exhausts to fit the 2018 Street Glide Special. Just choose the 2018 FLHXS Street Glide Special exhaust from our fit guide, and we guarantee you'll get the correct mufflers to fit your bike!
Have a question? Please ask our experts and customers who own this product.
