High stiffness-to-mass ratio, shot-peened, heat-treated and preset chrome silicon steel
Sold in pairs
Product Note:
Specification
Details
Length
315 mm
Material
Steel
Outside Diameter
36.7mm
Position
Front
Quantity
2
Spring Rate
1.00 kg/mm
Vehicle Fitment
Fitment is guaranteed or your money back plus free return shipping.
Don’t waste time installing a product that doesn't fit. We worked hard ensuring that this product is an exact fit on the vehicles listed below.
I'm 223 pds and my son is 245, we needed heavier springs for the front suspension forks and these worked great!
Great value
By John O. on
Verified Purchaser
I've used them in the past and they hold up well without sagging over time like cheaper springs can. They really improved the ride of my road king and it stays up in the stroke better.
Fork springs
By Joshua W. on
Verified Purchaser
Worked as expected.
Proven product, no issues
By Patty C. on
Verified Purchaser
I'm 230lbs and bought these to help prevent the forks on my little bike from bottoming out with my weight. They are not progressive, but they are much more appropriate for my size than the stock ones, which are .45kg/mm for my bike.
Race Tech springs
By Taylor W. on
Verified Purchaser
Springs arrived early and made a big difference!
Race Tech Fork Springs
By LeRoy (Junkyarddog) on
Verified Purchaser
I bought a set of Race Tech springs for my 1978 SR500e project. I went with the .90 kg and what a difference they are!! The front end is stiffer but not too stiff. Still a great ride quality and worth the money for sure. I did have to fig out the sag, but it was really easy to fig out and I would highly recommend this upgrade to anyone with a vintage street bike. I have since bought a pair of progressive rear shocks to match so my set up is complete.
Night and day difference
By Randal L. on
I put Race Tech springs on my Suzuki GV650 and couldn't be more pleased. The handling, ride and braking are all much better. If you are looking to improve the ride quality of your bike and have a small budget, this would be a good place to start.
How many stars would you give this product? Write a review.
I'm 48 230 6' riding a fxd dyna looking for heavy springs. Something has to be better then stock. Please and thanks
For your needs, I'd recommend going with a set of 0.90 kg/mm weight FXD fork springs. With that, you should see a significant improvement in front end performance given that the OEM springs are pretty middle-of-the-road (heh) for most riders.
What springs for a 190lb guy with a 1990 Suzuki GS500E?
By Anon.
Race Tech recommends going with .81 kg/mm springs or the closest spring rate springs offered for your weight on that bike. Looks like we have the .75 kg/mm springs for that bike which would be the closest offered.
I am 210lbs and have added a batwing and stereo system to the front end.
Yes, if you were to choose the 2013 Harley-Davidson FLD Dyna Switchback fork springs from our fit guide, you'd receive the correct components to fit the stock forks. The added accessories will not interfere with the installation of these fork springs.
I have a 1996 Harley Davidson FLSTN. The Bike has been lowered way too much for me. I am trying to put it back to original height, or at least close. Will these do the trick?
Depending on what components were used to lower the front end, these springs may or may not be right for you. If all that was used to lower the front was a different set of springs, then yes - the FLSTN fork spring kit from Race Tell will do the job.
It comes with a pair of fork springs along with a preload tube that is to be cut to length as specified in the included instructions. With that, you should have everything you need to get the front end back to stock height.
Verified Purchaser
