Denali Electronics Gen II CANSmart Controller

Harness the flexibility and intelligence of your BMW motorcycle's CAN bus electrical system to make installation of accessories drastically easier with the GEN II CANsmart Controller.

The CANsmart Controller provides plug-n-play installation and integrated control of up to four accessories to enable dozens of customizable settings that can be controlled right from the BMW "WonderWheel" or the CANsmart Accessory Manager Software.

The CANsmart's four circuits are pre-programmed to connect and independently control two sets of Denali 2.0 lights, a SoundBomb horn, and B6 auxiliary brake light.

Gen II - More Features, More Power, More Versatile

Unlike the Gen I CANsmart, all four circuits of the Gen II can provide a full 10 amps of continuous power and each circuit can be configured to run any accessory type. The maximum power draw for the whole unit remains at 30 amps continuous. The Gen II also features two new auxiliary light settings. You can now modulate your auxiliary lights and set your left and right side lights to independently cancel when you activate your corresponding turn signal.

Features:

• Set auxiliary lights to switch between a programmable high/low setting with the factory high beam switch
• Independently control two sets of lights ON/OFF and change intensity level (for both day and night) right from your original vehicle switches
• Set auxiliary lights to modulate to increase your visibility to other motorists
• Pulse your high beam switch three times and your auxiliary lights will strobe three times fast
• Cancels the corresponding auxiliary light when you turn your turn signal, preventing powerful auxiliary lights from overpowering your signal
• Flashes your auxiliary lights inversely to your hazard lights, increasing visibility during road side emergencies
• Quickly and easily connect high power aftermarket horns like a SoundBomb (sold separately) without having to add an additional harness or relay
• CANsmart software will automatically strobe your auxiliary lights when you sound your horn whether you have the factory horn or SoundBomb horn installed
• The CANsmart reads vehicle speed in real time to activate your auxiliary brake light during deceleration before you even touch the brake
• You can adjust the sensitivity and minimum speed at which the Smart Brake Feature will activate
• The CANsmart provides four different flash patterns that make super bright auxiliary brake lights even noticeable to motorists behind you
• Circuit Function Selector in the CANsmart software will let you run any accessory of your choice on any of the four circuits
• CANsmart provides a universal "accessory" option that means whatever accessory you connect to this circuit will turn on and off with your ignition
• Set the accessories on this circuit to have a delayed time out for up to 30 seconds after your turn off your bike
• "Accessory" circuit option is ideal for powering your GPS, phone, heated gear or any other electronic device

Includes:

• CANsmart Controller
• (x2) 5.5 ft extension splitters
• 5 ft SoundBomb horn extension cable
• B6 brake light wiring adapter
• Zip-ties
• Adhesive hook-and-loop fastener
• Micro USB programming cable