Vance & Hines Twin Slash Round Slip-On Exhaust

Item Number: 325533

5 stars 1 Review

Edit Vehicle


Product Description

Vance & Hines

Vance & Hines Twin Slash Round Slip-On Exhaust

The best price, best looking, best performing dual slip-on exhaust, Vance & Hines Twin Slash Round Slip-ons offer a large 4" diameter muffler body with a baffle delivering strong performance with a throaty rumble and the distinctive Vance & Hines twin slash end treatment.

Spec Details
Baffles Included Yes, Removable
Configuration Dual
Country of Origin USA
Exhaust Diameter 4 in.
Finish Chrome

Vehicle Fitment

Fitment is guaranteed or your money back plus free return shipping. Don't waste time installing a product that doesn't fit. We worked hard ensuring that this product is an exact fit on the vehicles listed below.

Harley Davidson

  • FLHR Road King 1995-2016
  • FLHRC Road King Classic 2007-2013
  • FLHRCI Road King Classic 1998-2006
  • FLHRI Road King 1996-2006
  • FLHRS Road King Custom 2004-2007
  • FLHRSI Road King Custom 2004-2006
  • FLHT Electra Glide Standard 1995-2009
  • FLHTC Electra Glide Classic 1995-2005, 2007-2013
  • FLHTCI Electra Glide Classic 1996-2006
  • FLHTCU TC Ultra Classic Electra Glide Twin-Cooled 2015-2016
  • FLHTCU Ultra Classic Electra Glide 1995-2016
  • FLHTCUI Ultra Classic Electra Glide 1995-2006
  • FLHTCUL Electra Glide Ultra Classic Low 2015-2016
  • FLHTCUL TC Electra Glide Ultra Classic Low Twin-Cooled 2015-2016
  • FLHTI Electra Glide Standard 2003-2006
  • FLHTK Electra Glide Ultra Limited 2010-2016
  • FLHTKL Electra Glide Ultra Limited Low 2015-2016
  • FLHX Street Glide 2006-2016
  • FLHXI Street Glide 2006
  • FLHXS Street Glide Special 2014-2016
  • FLTCU Ultra Classic Tour Glide 1995
  • FLTCUI Ultra Classic Tour Glide 1996
  • FLTR Road Glide 1998-2004, 2007-2009
  • FLTRI Road Glide 1998-2006
  • FLTRU Road Glide Ultra 2011-2013, 2016
  • FLTRX Road Glide 2015-2016
  • FLTRX Road Glide Custom 2010-2013
  • FLTRXS Road Glide Special 2015-2016


  • VN1700A Vulcan 1700 Voyager 2009-2013
  • VN1700B Vulcan 1700 Voyager ABS 2009-2013
  • VN1700C Vulcan 1700 Nomad 2009-2013
  • VN1700C Vulcan 1700 Nomad 2T 2009

Customer Reviews

Fast shipping, great sound.

out of 5
5 stars

By on May 3, 2016

Bought Sunday, arrived Tuesday. Had em on in 20 minutes. Make sure you polish them to get all the oil from your skin off before you start bike. The clamps from V&H have oil on them to prevent corrosion during storage. This will burn off and smell for a while. Don't freak out. They are deep and throaty when you want, quiet down around 2000 rpm.. Which I like.

5 stars
5 stars

Questions & Answers

  • Do this item have a hole for the sensor?

    By: Guest

    Yes. Vance & Hines exhausts have a provision for installing the oxygen sensor on machines that have on fitted to the stock exhaust system.

    By: Staff

  • Can the baffle, or part of the baffle be removed in order to possibly make the motorcycle louder?

    By: Henry

    Yes, the baffles can indeed be removed to make the exhaust louder.

    By: Staff

  • Do you send exhaust gaskets with this product, or do I need to order separately? And if so, how and where do I order these gaskets?

    By: Henry

    If the original gaskets are in good condition, there's no need to replace them. However, if you're concerned with their condition or just want to put new ones in, we do have Cometic exhaust gaskets available in packs of ten.

    By: Staff

  • Do you recommend torque cones

    By: Jim Morrison

    Torque cones were generally required on older, less-than-well-designed exhausts to solve off-throttle engine response. In the case of these slip-on mufflers, you won't see any benefit with torque cones. If you wanted to get the most out of these mufflers, however, we highly recommend the installation of some sort of fuel tuning device, specifically, a Vance & Hines Fuelpak FP3. With that unit, you'll be assured the best possible throttle response and the most engine power possible, all with a simple-to-install device that's also very easy to adjust.

    By: Staff

  • my is 2015 kawasaki vulcan voyager, there is any possibility that this pipes fit my bike?

    By: renetumbao

    While the pipes themselves will fit, the problem is that Kawasaki changed the location of their oxygen sensor after the 2013 model year Voyager. For the 2009-2013 Voyagers, the oxygen sensor was located on the headers, but on the newer bikes, they're mounted on the forwardmost part of the right muffler. As of this writing, Vance & Hines has yet to incorporate an oxygen sensor bung on these mufflers and, consequently, they will not fit your bike.

    Cobra does make two slip-on exhausts that will fit the 2015 Kawasaki Voyager in the form of the

    Cobra Straight Cut Slip-On Exhaust

    and the

    Cobra Tri-Flo Slip-On Exhaust

    Both of those slip-on mufflers come with a bung on the right-side muffler for incorporating the stock oxygen sensor into the muffler and will present no problems for installation.

    By: Staff

  • Are the slip on pipe wraped over baffles or they the galvanized only thanks.

    By: Lou

    The Vance & Hines baffles that come with the Twin Slash round slip-on mufflers do not include any wrapping. For that reason, Vance & Hines refers these baffles as of a maintenance-free design.

    By: Staff

  • It shows your price - is this for one muffler or for both needed?

    By: Jim

    The price is indeed for a pair of mufflers. You only need to order a quantity of one to replace both of the stock mufflers on your machine.

    By: Staff