Progressive's front fork cartridge kit converts dual damper rod, and damper rod/cartridge forks to true high-performance monotube cartridge forks! This kit contains a pair of high-performance, gas charged Mono-tube fork cartridges complete with a set of Progressive's famous fork springs and is a direct internal component replacement. No modification of any kind are required to install these in your forks. Just remove the old internals, plug in the Progressive cartridge kit and you're ready to go.
Complete fork internal replacement kit
Improved resistance to front brake dive
Improved front end stability and cornering
Improved bottoming control
Comes with all required hardware and installation instructions
Limited lifetime manufacturer's warranty
Product Note:
Specification
Details
Country of Origin
USA
Quantity
2
Spring Rate
Varies (make selection above)
Stock Length
Varies (make selection above)
Warranty
Lifetime Manufacturer Warranty
Vehicle Fitment
Fitment is guaranteed or your money back plus free return shipping.
Don’t waste time installing a product that doesn't fit. We worked hard ensuring that this product is an exact fit on the vehicles listed below.
Harley Davidson
FLHR Road King 1997-2013
FLHRC Road King Classic 2007-2013
FLHRCI Road King Classic 1998-2001, 2006
FLHRI Road King 1997-2006
FLHRS Road King Custom 2004-2007
FLHRSI Road King Custom 2006
FLHT Electra Glide Standard 1997-2009
FLHTC Electra Glide Classic 1997-2005, 2007-2013
FLHTCI Electra Glide Classic 1997-2006
FLHTCU Ultra Classic Electra Glide 1997-2013
FLHTCUI Ultra Classic Electra Glide 1997-2006
FLHTI Electra Glide Standard 2003-2006
FLHTK Electra Glide Ultra Limited 2010-2013
FLHX Street Glide 2006-2013
FLHXI Street Glide 2006
FLHXXX Street Glide Trike 2010-2011
FLTR Road Glide 1998-2004, 2007-2009
FLTRI Road Glide 1998-2006
FLTRU Road Glide Ultra 2011-2013
FLTRX Road Glide Custom 2010-2013
Customer Reviews
Montube cartridge kit
By Grant G. on
Verified Purchaser
Pretty straight forward installation as long as you know what your doing. I put these on my iron 883 (2016) and they look great!
100% Improvement.
By Dale N. on
Verified Purchaser
Easy instillation, improved the ride and handling 100%.
Progressive mono tube front shocks
By Charles P. on
Verified Purchaser
I finally got my 1990 flhtc dresser on the road after neck race and bearing and fork rebuild. I installed progressive fork cartridge mono tube stock height with three pe load spacers each side for stiffer handling and pulling my bushtec trailer. Bought my bike new and has 144000 miles on it now. I've been use to the anti dive stock set up, but must admit I love this progressive inners! I'm still running stock rear air shocks.
Great ride
By Michael Z. on
Verified Purchaser
Easy installation.
Will be upgrading the rear
By Josh on
Verified Purchaser
These progressives are amazing for an upgrade from factory. Will be upgrading the rear soon.
Feel the difference
By None on
Feel the difference on straight roads, however, real different in the twisties! Feels more secure. Holds the lean without the "pogo" feel!
Just installed
By Michael D. on
Verified Purchaser
Just installed, all good. Rides better, longer ride, can tell more because of adjustment factor. This smoke in my area is holding me back from riding. Check back.
Bike is now rideable!
By Terry F. on
Verified Purchaser
Made a world of different on the ride quality on my 1200 Nightster; it does not rattle your teeth loose now. Fairly easy to install but messy getting the oil out of the stock forks. A must for any Harley with the original dinosaur front suspension; also added rear Progressive 13.5" shocks and no longer drag the pegs on slow turns.
Great handling
By James C. on
Verified Purchaser
Great handling and performance! Went from a slammer kit to these and it was night and day! Love the ride quality.
Monotube Cartridge Kit
By Robert R. on
Verified Purchaser
100%
Different bike now, just right
By terry on
Much better ride quality. These put my Softail Custom in a different league. I used two spacers because we ride double most of the time. Wasn't sure if it would ride too hard, but I got lucky and it was just perfect.
How many stars would you give this product? Write a review.
Questions & Answers
Does this kit replace my air ride front fork stock setup?
By Anon.
2000 road king.
Yes, that's correct. These cartridge kits completely replace all of the internal fork components on the 2000 FLHR Road King. The air ride components will be removed to facilitate this kit's installation.
Hi I have a 1997 flht Electra looking to purchase. How much fluid is used or recommended for each fork and does it come with all seals caps clips every thing
By Curt
In the case of the 1997 FLHT's fork cartridge kit, you'll need 5 oz. of 10W fork oil for each fork.
As for seals, none of those are included in the kit. You can re-use the OEM components if they're in good condition. That said, considering the age of the bike, and since you're already halfway there, you might as well put some new seals and/or bushings on while you're at it. That way, there will be no question as to the competency of your new fork internals. And yes, you WILL notice a difference in front end feel upon installation of this cartridge kit. It's really worth every bit of effort!
2012 street glide. Is this stock ridding height?
By Anon.
Yes, Progressive's cartridge kit for the 2012 FLHX Street Glide will retain the original ride height of your bike's forks. The included instructions will explain exactly how to go about fitting these internals to your machine so you can maintain that stock ride height.
i Have a 93 flhtc would I be putting a cartridge in both legs
By thom
Yes. The 1993 Harley Davidson FLHTC Electra Glide Classic fork cartridge kit from Progressive includes cartridges for both fork legs.
Does progressive have the needed oil to add to my order
By Spiffy
Yes, Progressive does offer fork oil. If you search our website for Progressive Fork Oil, it should pop right up for you.
Can this lower front 2 inches
By Anon.
This kit would not provide a lowered stance. If you would want to have the front end lowered, you would want to go with the Progressive Lowered Monotube Cartridge Kit. Simply search for Progressive Lowered Monotube Cartridge Kit on our website and you will find it.
Do i need to remove the tire and take the forks off to install this?
By Anon.
Yes, at the very least, you will have to remove the front wheel from your machine in order to install this Progressive fork cartridge kit. The reason being is that you'll have to loosen the bolt on the bottom of each fork that secures each OEM Harley fork cartridge in place. Plus, with all of the fork oil that will come out once each bolt is pulled, you're looking at a small mess, too. Unless you have something that can reach all the way to the bottom of the forks to suck out that oil, it's best to pull the forks off of the bike and drain them by dumping out all of that fork oil into a pan.
Have a question? Please ask our experts and customers who own this product.
Verified Purchaser
