Cobra PowerFlo Intake System

Really sweet air cleaner. Four stars for two reasons. One, it's expensive. Two, the breather bolts are soft aluminum and it's super easy to round them off, one slip of the socket and it's stripped. I love the look of it and other than the breather bolt issue, the quality if very good. I also like the low profile as it does not rub on my leg like the previous air cleaner I had.

Factory exhaust catalytic converter clogged so after tons of research, I decided on this air intake to go with the cobra full exhaust. The look is so much better than the factory intake and no longer does my knee ride braced on the intake love the aggressive look definitely five stars.

Put this intake on my Vulcan. Cobra Dragsters and Fi2000R are next. The kit had everything I needed and the install went smoothly. No leaks to be found!

Install was flawless...product was awesome. It's on my Vulcan at this moment.

Good overall quality.

Beautiful product. I'm surprised I don't see more of these. Nicer than most of what's available in my opinion. Highly recommend.

Filter fit and works fine.

I couldn't be happier with the Cobra Powerflo. It was easy to install and looks great. I already had Cobra exhaust and the tuner installed on bike. I was surprised at the amount of added performance it provided. Great product and highly recommend. Wished I would have purchased years ago as it has really improved my riding experience. Thank you Cobra.

This Cobra air intake absolutely blew away all my expectations! This was an easy install and a very! Noticeable power increase. Worth every penny

Good directions made it easy to remove stock filter assembly and install the new air intake assembly. Still playing with the cobra fuel module.

Easy to install. Directions were spot on from removing the stock exhaust to installing the Cobras. Beautiful Deep sound...and loud!

Instructions were a bit off but it's a common sense install.

Great intake fits nice, sticks out less than the original. Looks good. Combined with the 3" Cobra Mufflers (slipons), and the Cobra FI2000 fuel management sys. These are on a 2017 HD Heritage classic softail.

It is awesome my husband loves it on his bike and also got him cobra exhaust as well and what a different it made on his bike love it.

Bit of a pain to install with the design of my bike, overall looks good, filters easy enough to change, do not regret in any sense of the term.

I absolutely loved this intake!

Item is wonderful and easy to install. The instructions is a bit confusing. I just look up at YouTube. It works great, smaller than OEM filter so it doesn't bump on my right knee anymore.

Couldn't be happier with the price, quality, performance, and appearance. It really dressed up my bike and gave it a little more pop when I hit the throttle. I'd highly recommend buying the cobra tuner as well.

Fits perfectly on my 2010 fury no mods whatsoever and built solid not like the plastic stock one.

Intake looks good and is smaller than the stock set up giving more room around the intake and leg room. Install and directions were not so good, would recommend running a tap thru all of the bolt holes prior to install, not very impressed with the quality....brackets and mounting seem cheaper and had to use a tap to get bolts to work properly.

Works as advertised, manufacturing quality is great. Instructions are complete. Shipping great.

Speedy delivery of a quality product. Solid unit. Well packaged and easy install instructions. Thank you!

Perfect product and fast customer service questions answered.

Quality components, easy to install.

Great quality, good looks, pulls in way more air the stock filter.

Wow! Big difference than stock. It actually smoothed out the revs so I could run the gears a bit longer. It really helps on my SCR950. Easy 20 minute install and a bit better riding comfort (huge stock intake hadda go). Seems a bit snappier but now I need an exhaust to really wake it up.

Definitely increased the airflow, definitely need the new EFI controller I ordered, but completely expected, looks great, easy install.

Adds an awesome look, better performance, solid construction, and easy install. Cobra makes great parts and have good installation instructions.

Beautiful addition to my bike. Really makes it pop instead of the cheap plastic stock air filter box.

I like the quality, the look & the performance of the Cobra Powerflo intake. Fast easy installation, instant improvement from take off to Rev range. Not expensive, so the price tag is exceptional.

I love the look and the way the bike sounds. I highly recommend the Cobra tuner with it.

Definitely a performance boost on my 2021 Harley Freewheeler. Looks great. Chrome finish is flawless and is a big enhancement over the stock air cleaner, which already looked pretty good.

Love this intake...went on great and performs great! Very happy with my purchase!

Installation was fairly simple, noticed better performance instantly! I noticed I get more out of each gear. And makes passing on the highway easier! Overall pleased and plus it’s such a good looking set up!

Great look! Easy install!

Got the 2 in 1 exhaust along with the powerflo, my bike runs great and sounds even better. All in all everything took me about 2 hours to install. Instructions are easy to follow if you're unfamiliar with intake systems. Super happy with the product!

Great product and easy installation. Would highly recommend!

Great part. Well made. Includes pretty good instructions. Straight forward install aside from a couple very tight engine cover bolts that hold the new bracket.

Love the look of my 06 Kawasaki Vulcan with this powerflo intake. Looks awesome.

It is very high quality and beautiful finish. I love it!

The intake looks amazing and was easy to install. Only gripes are that there is a small filter that goes on the end of the larger intake hose, this fitting is too small and it takes a aftermarket clamp to get snug. Also if you are going to put this on your carb go ahead and invest in upgrading the carb with a jet kit. That's something they don't tell you and it will save you a big headache (changes the air flow so it runs lean after installation). Overall its a great investment.

I have a 2013 Honda fury it fit perfectly and increased my power. I put new pipes on and a tuner with it. Huge difference

I feel to have a metric bike and be able to put on a mod to get that much more power for that value is exceptional.

I installed Cobra Neighbor Haters on my 2015 H-D Ultra Limited last year, and I paired this intake with the Cobra Fi2000r fuel management yesterday. Amazing performance, better sound from the NH exhaust. Easy 30 minute install for this part of the upgrade. When accelerating you can hear much more air getting into the engine.

Fit perfect. Thumbs up.

Looks and works great. Big improvement over stock intake. You will hear the sucking air intake.

Good quality of material!

I didn't just go for the look, I wanted the extra horsepower and delivery. As soon as I give it gas it wanted to take off, I love it and the look is better then I expected.

Awesome parts.

It is a very nice intake and was easy to install looks good. Works excellent to my liking. Would highly recommend this product. Very nice.

Really adds to the sharpness of the bike.

I am not a mechanic and still it took me just 30 minutes to install myself. Noticed an increase in performance from the first ride after installation, plan to upgrade to the Cobra pipes in the near future. Highly recommend this product.

Great product it is exactly what I thought it would be. Easy to install took no more than 20 mins.

This intake looks amazing on my vulcan 900 custom! Works great and easy to install! Please note that if you do buy this you do have to remove old air valve off stock intake and install on new one! Highly recommend this intake to anyone looking for high quality product!

I got this intake system and it is the coolest. Installation was easy and it looks and sounds great.

Probably the most well built and highest quality air intake system I’ve seen on the market today! I could tell a difference immediately and coupled with the cobra slip on exhaust and the cobra Fi2000 tuner. My bike woke up!

Looks great and doesn't take up much space. After my experience I bought pipes three days later.

Looks good. Super easy install. Works great. What more could you ask for.

Looks great and seems to work well letting the engine take in more needed air flow & volume.

Great item, great price! What more could you want?

Just buy it, you wont regret it, trust me. Looks great in black.

Although the cost is pricey I love the looks and quality of it. Seems to improve the engine response. Looks great on the bike.

This item installed pretty easy as well with my street rod pipes and engine guards. Same day, a few hours of dismounting OEM parts and installing all these aftermarkets parts. Love the whole process. I have rode a couple of times but I cant say there is any change in performance with both items, but it rocks in looks and sound!

Comes with everything you need to install, easy install instructions. Took about 30 minutes to take off stock intake and install new one. Works and sounds great

Cobra Powrflo Kit looks perfect. This is my first order from y’all, but I’ll definitely be back, and recommend you to my friends!

Exact fit. Easy to install. Looks great.

Works perfectly on my Harley Davidson Sportster 883. I have limited mechanical abilities and even I figured this one out.

Looks great,functions well, but...if you ever need to replace the tiny little air filter, WOW...only available from Cobra at over 70.xx plus even though K&N makes the filter,they can't supply it, must be purchased at Cobra. I've been told they are treated with oil and you can just blow them out with air. Mine is starting to crush a little from being in place for a year but I blew it off with air, got oil on my fingers, but it still didn't look that clean but I put it back inside. Don't have another 70 bucks to spare right now and there is no reason a filter that small should cost that much. That's why my ratings are down on this product.

Great quality product at an affordable price.

I am more than satisfied with the product, easy to install and the right price. If you owe a Honda Shadow, you should definitely consider switching to the cobra powerflo intake :)

Excellent

I love this intake. It's not the cheapest on the market, but the fit and finish was perfect and installation was a breeze. Looks fantastic on the bike. When installed with aftermarket pipes and a tuner, it's a whole new bike.

I always liked style of the Cobra Powerflo, it adds up that hotrod look and takes a lot less space than stock airbox, doesn't stick out that much and provides more leg room. I installed it along with Cobra slashdown pipes and fuel controller and it feels like I got a different engine!

Put it on easily. Looks good, works great.

Looks good - works good.

I purchased the cobra PowerBook system. The hardware was missing,service sent me a new order within a day. Doing more business with them as we speak.

I recently purchased the PowerFlo and it is night and day. The installation was quick and easy. If you are impatient like me, go ahead and get the K&N spray oil so you can have that sitting after you spray it while you install the PowerFlo. Customer service at Partsgiant is exceptional and I have now ordered the Cobra FI2000 from the as well. I will order from here from now on!