S&S Quickee Pushrod Set

S&S Quickee Adjustable Pushrod Set

These Quickee pushrods can be both installed and removed easily from an assembled engine. The S&S design permits a simple, trouble free installation that does not require removal of the gas tank, rocker assemblies, or even the rocker box cover! OE pushrods may be cut to permit removal without rocker disassembly.

Threaded adjuster screws into the pushrod until the threads disengage and the adjuster simply slides into the pushrod, making installation or removal a snap
Once the pushrod is installed and adjusted, the locknut prevents the adjuster from moving
Works with stock pushrod covers and adjustable to work with all stock and aftermarket cams
Sold as a set of four
Made in the USA

Product Note: Only fits models with stock engines.

Specification	Details
Country of Origin	USA
Engine Type	Varies (make selection above)
Length	Varies (make selection above)
Quantity	4
Size Over Standard	Varies (make selection above)
Country of Origin	USA
Engine Type	Evolution Big Twin
Quantity	4
Size Over Standard	Stock

Vehicle Fitment

Fitment is guaranteed or your money back plus free return shipping.
Don’t waste time installing a product that doesn't fit. We worked hard ensuring that this product is an exact fit on the vehicles listed below.

CVO FXR2 1999
CVO FXR3 1999
FLH Electra Glide 1984-1985
FLHR Electra Glide Road King 1994
FLHR Road King 1995-1999
FLHRCI Road King Classic 1998-1999
FLHRI Road King 1996-1999
FLHS Electra Glide Sport 1984-1993
FLHT Electra Glide 1986-1987
FLHT Electra Glide Standard 1995-1999
FLHTC Electra Glide Classic 1984-1999
FLHTC Liberty Electra Glide Classic Liberty 1986
FLHTCI Electra Glide Classic 1996-1999
FLHTCU Ultra Classic Electra Glide 1989-1999
FLHTCUI Ultra Classic Electra Glide 1995-1999
FLHX Electra Glide Special 1984-1985
FLST Heritage Softail 1986-1990
FLSTC Heritage Softail Classic 1988-1999
FLSTF Softail Fat Boy 1990-1999
FLSTN Heritage Softail Nostalgia 1993
FLSTN Heritage Softail Special 1994-1996
FLSTS Heritage Springer Softail 1997-1999
FLTC Tour Glide Classic 1984-1991
FLTCU Ultra Classic Tour Glide 1989-1995
FLTCUI Ultra Classic Tour Glide 1996
FLTR Road Glide 1998-1999
FLTRI Road Glide 1998-1999
FXD Dyna Super Glide 1995-1999
FXDB Dyna Daytona 1992
FXDB Dyna Sturgis 1991
FXDC Dyna Glide Custom 1992
FXDL Dyna Low Rider 1993-1999
FXDS-CONV Dyna Convertible 1994, 1999
FXDWG Dyna Wide Glide 1993-1999
FXE Super Glide 1984
FXEF Super Glide Fat Bob 1985
FXLR Low Rider Custom 1987-1994
FXR Super Glide 1986-1994
FXRC Low Glide 1985
FXRC Low Rider Chrome 1987
FXRD Grand Touring Edition 1986
FXRDG Disc Glide 1984
FXRS Low Glide 1984-1992
FXRS-CONV Low Rider Convertible 1990-1993
FXRS-SP Low Rider Sport Edition 1987-1993
FXRT Sport Glide 1984-1992
FXSB Low Rider 1984-1985
FXST Softail 1984-1990
FXST Softail Standard 1999
FXSTB Softail Night Train 1999
FXSTC Softail Custom 1986-1999
FXSTS Springer Softail 1988-1999
FXSTSB Softail Bad Boy 1995-1997
FXWG Wide Glide 1984-1986

Customer Reviews

S&S push rods perfect

First time using the quicker pushrods. They were easy to use. I do like them. I installed new S&S tappets also. Everything worked well. Only road around 20 miles so far due to weather. No ticks yet. Looking forward to more miles.

A+

These S&S Quickie pushrods made my lifter swap a breeze. The 1/4" diameter on the adjustable part seems a bit whimpy, compared to other pushrods, but I'm not running race cams, so these should do the trick for my application. I trust the S&S quality 100%.

Can't go wrong with S&S. Great quality.

Excellent product. Highly recommend

Very satisfied so far.

Very nice, easy to adjust.

Works awesome.

Excellent product.

S&S is the best. Use their products on my Harley.

The s&s quickee pushrods saves me a ton of work and money you can change the cam & lifters without tearing the top end apart saves time and money, great product.

Easiest adjustable pushrods I've found. When lock nut tightened have never had them loosen.

Great product, good value, real easy to install.

Awesome pushrods! Just keep in mind that on the M8, the factory tubes are too long to adjust properly, and to finish off, if you decide to go with the S&S pushrod tubes, make sure you get the kit with the tube keepers included. Factory keepers won’t keep the S&S tubes from leaking. I learned this the hard way. Learn from other’s mistakes, so you don’t have to.

Really nice. Easy to use

Anything S&S is really the best you can get. If you are changing your cam, quickee pushrods save a lot of time and if you don’t have valve issues or leaks then why mess with rocker boxes when their good? Be careful about cam timing and read the instructions that come with the pushrods. The only criticism I have is the instructions cover too many models and can be a little confusing.

How many stars would you give this product? Write a review.

Questions & Answers

I have a 2016 Harley breakout, can I reuse the stock tubes with these rods

By Anon.

I'm putting in a Woods tw222 cam

These pushrods will indeed work with the stock pushrod tubes.

By Tom

Are these push rods steel or aluminum? Will they fit 94 flstf. What threads are they. 32 to 1

By Anon.

These are made of Chromoly Steel.

By Andy

Do i need different covers for my 2016 dyna lowrider?

By Chris

Yes, you would need different pushrod covers in order to use these pushrods. They do offer these pushrods with a set of covers so you can get it all in one shot. Just search our website for S&S Quickee Adjustable Pushrod Kit with Covers.

By Andy

Do I have to change pushrod tubes on a 96 heritage softail classic with these pushrods

By Chad

You can use the stock pushrod tubes with these pushrods on that 1996 Heritage Softail.

By Andy

will these fit my "17 M8 street glide and do I need the covers also

By bardo

If you were to choose the 2017 Harley Davidson FLHX Street Glide S&S Quickee pushrods from our fit guide, you'd receive the correct adjustable pushrods to fit your machine. As for the pushrod covers, those are only required for 2007-2012 model year machines. Specifically, Evolution style pushrod covers are required if you wish to be able to adjust the pushrods easily on those machines. So in your case, for a machine with a Milwaukee Eight engine, just choose your bike and you'll be all set. There's no need to buy a set of pushrod covers to install these on your machine.

By Staff

i have a 1999 harley FLSTF Fatboy.are the stock tube covers used when installing the s&s quickie pushrods

By Philip

The stock tube covers can be used with the Quickee pushrods. As with any engine builder, you'll appreciate how easily these fit in place!

By Staff

i have a 1997 harley low rider fxdl are the stock tube covers used when installing the s&s quickie pushrods

By Richard S.

Yes, S&S Quickie Pushrods for the 1997 Harley FXDL Dyna Low Rider are indeed compatible with the OEM pushrod covers. The stock tube covers will fit just fine.

By Staff

I have a 97 heritage do I need different covers or can I use the stock pushrod covers??

By Anon.

S&S Quickee Pushrods for the 1997 Harley Heritage Softail are designed to work with the stock pushrod covers. There's no need to purchase a special set of covers just to fit these to your machine.

By Staff

Do you have a set or will these pushrods fit a 1998 Harley Davidson FLHTCI Electric Glide Classic

By TDUB4DUB

Yes, these pushrods will indeed fit your machine. Just select the FLHTCI Electra Glide Classic from our fit guide and you'll get a set of pushrods that'll fit your machine.

By Staff

Do I need different push rod covers for my 2003 Ultra Classic Harley-Davidson

By Clyde M.

It's a twin cam, 88 inch motor

Yes, you will need a set of 1984-1999 style pushrod covers in order to install the Quickee set on your bike. Those covers can be found on our S&S Pushrod Tube Kit web page. Better yet, you can get the complete kit, with everything you need for your bike in the form of a S&S Quickee Pushrod Conversion Kit. It's a lot less expensive to get the entire kit and you don't have to worry about getting anything else.

By Staff

I have a 96 sportster 1200 xlh. According to the info on these quickee pushrods I can use my factory pushrod tubes. I am unclear how that is possible. These are a one piece cover with what seems to be very little room for removal much less getting a wrench past to make an adjustment on the push rods. Can you please explain how this works? Are there 2 piece covers available for the sportster?

By James

You're correct in that, Xl models do require two-piece S&S Pushrod Tube Kit to be able to install and use the Quickee push rods. We have pushrod tubes available in the form of an S&S Pushrod Tube Kit or a Drag Specialties Pushrod Tube Kit.

By Staff

Have a question? Please ask our experts and customers who own this product.

S&S Quickee Adjustable Pushrod Set

Select Your Vehicle - Fitment Guaranteed

S&S Quickee Adjustable Pushrod Set

Vehicle Fitment

Harley Davidson

Customer Reviews

Perfect

S&S parts

A+

Made my lifter swap a breeze

Great quality

Highly recommend

Very satisfied

Very nice