DG Performance RST Slip-On Exhaust

Overall, pipe fitment wasn't unusually difficult, and the bike sounds great, but oddly, where the pipe bolts to the mid section of the frame, the attaching bolt provided in the kit is a small M6 bolt, yet I removed a larger M8 bolt holding the stock pipe. So attaching the pipe to the frame means you're putting a smaller M6 bolt in a frame mounting hole made for an M8 bolt. It makes for a sloppy fit. I didn't like it, so I drilled and tapped the attaching point on the pipe for the larger M8 bolt and I'm much happier with the fitment now.

Perfect exhaust for my DR650! Looks great and sounds great - good sound and not too loud. Much lighter and better fitting than stock. Super easy install.

The exhaust itself is very nice. I had to use my own hardware. Certainly the hardware supplied with the exhaust could be improved upon. The fit was perfect - used some copper RTV between the header and the slip joint, fastened in place and let sit for 24 hours. Done and done. The sound of the exhaust is great - big improvement.

Great power increase.